Hand operated manual syringe assembly with luer lock tip attachment supplied with stainless steel blunt end dispense tips 1/2" long. A multi purpose evaluation pack of clear 6ml/ 6cc manual syringes with luer lock dispensing tips. Clear syringe barrel includes plunger rod and rubber piston. Luer lock twist-on tip attachment. Tips are 1/2" long blunt end small bore 22, 23 and 25 gauge. Non sterile manual 6cc/ 6ml size syringe barrel assembly. Natural (clear) barrel high density polypro. Luer lock for twist on attachment of needle tips.

Syringe assembly incorporates the 400 series syringe barrel, 400 series plastic plunger rod and 400 series rubber piston. These syringes are industry compliant low friction polypropylene. Suited for use with most fluids, adhesives, solvents, primers, inks, paints, lubricants and activators. Clear barrel without graduations. SE series general purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. Tips are colour coded for gauge size.

The tip features a slightly rounded internal design where the shaft meets the hub to improve fluid flow and reduce flow restriction. This allows for a lower pressure to be used for dispensing of liquids and pastes.

Please note that these items are shipped in sealed and labelled packs direct from stock.

---

Part ID: SA7991
Materials: Polypropylene/ Stainless Steel
Syringe Length: 3.05" - 77.47mm
Syringe Outer Diameter: 0.58" - 14.73mm
Needle Tip Tube Length: 0.50" - 12.5mm
Connection: Luer Lock

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: SA7991
• Materials: Polypropylene/ Stainless Steel
• Syringe Length: 3.05" - 77.47mm
• Syringe Outer Diameter: 0.58" - 14.73mm
• Needle Tip Tube Length: 0.50" - 12.5mm
• Connection: Luer Lock

The kit includes: - Part 406LL-1 Clear syringe luer lock 6ml or 6cc size x 2 Part 406L-2 Rubber wiper piston 6ml or 6cc size x 2 Part 406L-4 Plastic push rod 6ml or 6cc size x 2 Part SE422050PK 22 GA tip 1/2" long Blue 0.406mm ID x 2 Part SE423050PK 23 GA tip 1/2" long Orange 0.330mm ID x 2 Part SE425050PK 25 GA tip 1/2" long Red 0.254mm ID x 2

Dispensing tips and syringe barrels are designed to work with most low, medium and high viscosity fluids, adhesives, inks, pastes, gels and lubricants. Syringe barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. This design ensures syringe barrels do not come loose from the tip. The luer lock tip attachment offers secure dispensing under pressure.