Industrial dispensing bottles for applying most low to medium viscosity fluids, fluxes, adhesives, primers, henna inks, PVA glues and coatings. This kit contains bottle, luer lock bottle cap, tip cap seal, push-on tip seal and 14 gauge smooth flow tapered tip.
The caps included allow the bottle to be sealed air-tight when the tip is removed but also the tip itself to be covered.
Suitable for flux, solvents, adhesives, inks and solder mask. A low cost and simple dispensing solution for low viscosity liquids. Ten bottles, tips caps supplied in each bag ordered . Ships from stock.
Kit Includes:
10 x Bottle with Luer Lock Cap
10 x Black Bottle Cap Seal
10 x Tip Cover Cap
10 x Smooth Flow Tapered Tip 14 Gauge
Commodity Code 39269097.
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- 240ml (240cc) or 8 oz capacity
- Low density polyethylene body/ nylon cap
- Natural colour body/ black cap
- Thread size 28-410 for cap
- Male luer lock cap
- Silicone-free plastics
This bottle is non sterile. Bottles and caps are supplied in sealed packs with product label. All tips will attach to luer lock bottles by twisting on. Silicone-free means that the bottles will not contaminate any adhesive or fluid dispensed from them. Do not use this product with thick pastes, (consider our syringe guns). Typical fluids dispensed with these tips include glues, solvents, anaerobics, lubricants, gels, fluxes, epoxies, inks, PVAs, etc.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
|
