A pneumatic metal cartridge gun with quick attach bayonet retainer, threaded adapter and trigger handle incorporating an adjustable air regulator. Quick exhaust air release to reduce pressure build up and reduce drips or material oozing. Hook ring on the top to use with a counter balance and support if required. Use with all 20oz (591cc) cartridges, Semkits and Techkits. Apply controlled beads or potting of most adhesives, fluids, sealants, RTV, grease, gels, long curing epoxies, mastics and potting compounds. Use at pressures to 100 PSI.

Load in a filled 20oz cartridge. Replace the retainer and twist on tightly to secure the cartridge. Attach a threaded nozzle or use a male luer lock adapter with any standard needle tips. Cartridge gun spares and accessories are also available. Data sheet available here.

---

SPECIFICATIONS:
- Maximum Thrust: 2.5kN
- Barrel Length: 249.4mm
- Pressure: To 100 PSI
- Air Inlet: 1/4 Inch BSP Male Thread
- Gun Colour: Black
- Tool Weight: 1.95kg
- Barrel Material: Anodised Aluminium
- Handle Material: Base Moulding, (PC), (ABS)
- Approval: CE, REACH, RoHS
- Commodity Code: 90289090
- Origin: GB
- Brand: Adhesive Dispensing Ltd

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: AD110-20
• Construction: Stainless Steel/ Aluminium/ Nylon
• Colour: Black
• Attachment: Bayonet retainer to handle
• Weight: 1.95kg
• Warranty: 1 Year

This gun is compatible with industrial cartridges part code TS20C and plungers TS20P as well as 20oz cartridges part 229734 and plungers part 220259. And with 20oz Semkits and Techkits.