Cartridges are supplied packaged in sizes from 30cc to 960cc with most single part materials as well as resin pre-mixed and frozen materials. Cartridges are silicone free and industrial grade strength for use with even the most aggressive adhesives and fluids.

We provide cartridges filled with your selected material and packaged air-free for controlled dispensing. By receiving your material packaged in a high quality cartridge, you eliminate the need to transfer from drums, cans or tins. Each cartridge is supplied with a data label including batch code, part no, date of fill, shelf life and material safety information. Cartridges can be used with a full range of manual or pneumatic guns or in cartridge retainers when feeding a metering valve system.

Plungers are selected to suit the type of material. Low pressure plungers for very high viscosity fluids, dual wiper plungers for lower viscosity fluids. Caps are used to provide an air-tight seal for shipping and storage. All cartridges feature a 1/4" NPT thread to allow attachment of any standard nozzle or any needle tip when used with a needle adapter.

Cartridges are supplied with reduced air entrapment and include pre-inserted wiper pistons and cap seals. We only supply the highest quality plastic components that are silicone free and industrial grade safe.

Common Fluids Packaged - RTVs - Sealants - Greases - Pastes - Pre-mixed and Frozen Epoxies - Silicones - Liquid Fluxes - Gels - Inks

Size Capacity 1.oz Cartridge 30cc/ 30ml 2.5.oz Cartridge 60cc/ 60ml 6.0.oz Cartridge 180cc/ 180ml 8.0.oz Cartridge 230cc/ 230ml 10.oz Cartridge 310cc/ 310ml 12.oz Cartridge 360cc/ 360ml 20.oz Cartridge 600cc/ 600ml 32.oz Cartridge 960cc/ 960ml