Join our mailing list!



You are here: Home > Dispensing Equipment > Dispensing Robots > J2000 Series Benchtop Robots > J2500 Dispensing Robots
We found 0 results matching your criteria.

J2500 Series desktop robot dispensers

Dispensing robots automate most fluid assembly processes providing exact fast and repeatable deposits without mess, waste or errors. For making repeat dots, beads, arcs and circles with any fluid, adhesive or paste. Easy to setup and run and these systems are supplied with syringe dispenser as standard.


Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

 




Model J2500N industrial robot has a dispensing area of 20.07 x 20.07 inches (510 x 510mm), but the footprint is less than 25 inches (629mm) square for mounting on a standard workbench. The system is easily programmed using a teach pendant or an optional Windows software. Model I&J2400N is a popular dispensing robot in the I&J2000 bench robot series and can accept dispensing valves and syringes with tooling loads of 11Kg and 6Kg.

J2500 series robots have a maximum base work area of 510mm x 510mm.  In 3 or 4 axis indexing. The 3 axis will allow the head to index vertically to a height of 50mm as it moves X & Y.  And 4 axis for 360 degree head rotation (R) to dispense to the sides of components or around edges.  All robots are supplied with a digital syringe controller, I/O cable, CE compliance start/ stop box, teach pendant, airline hoses, syringe bracket, slide adjustment and detailed instruction manuals.  Ready to use out of the box with comprehensive 1 Year warranty and detailed product/ technical support.

Features:
� Dispense area
20.07" x 20.07" (510mm x 510mm)
� Repeatability 0.01mm for precise dispensing
� No computer skills required
� 255 programs, 30,000 points of data to internal memory
� Available in two, three and four axis models
� Continous path motion for accurate XYZ dispensing
� Interpolates lines or arcs for three-dimensional dispensing
� Teach Pendant and (optional) PC programming

Accessories:
� J2000N-T - Teach Pendant (Included)
� J2000N-WIN - Windows� Software (Optional)
� 561320-110V - I/O Control Box for up to five dispensers

Models:
� J2500N-1: 3-Axis Robot 110V
� J2500N-1CE: 3-Axis robot 110V CE
� J2504N-1: 4-Axis Robot 110V
� J2504N-1CE: 4-Axis Robot 110V CE
� J2500N-2: 3-Axis Robot 220V
� J2500-2CE: 3-Axis Robot 220V CE
� J2504N-2: 4-Axis Robot 220V
� J2504N-2CE: 4-Axis Robot 220V CE

J2500N 3-Axis Robot

Operating Range: X-Axis: 510mm, is: 510mm, Z-Axis: 150mm
Maximum Load: Worktable: 24.2lbs, Tool: 13.20lbs
Speed PT: X & Y Axis: 8-800mm/sec, Z-Axis: 320/sec
Speed C: X, Y, Z Combination: 0.1-800mm/sec
Repeatability: �0.01mm per axis
Resolution: X, Y, Z Axis: 0.01mm
Data Memory Capacity: 255 programs; 30,000 points
Drive System: 5-phase stepping motor
Operation System: Point to Point and Continuous Path
Interpolation: XYZ simultaneous (CP) 3D linear interpolation
Teaching Method: Remote & Manual Data Input (MDI) teaching
PLC: 50 programs, 100 steps for each program
I/O Signals: 16 input & 16 output signals
External Interface: RS232C - one channel for PC, one channel for the teach pendant and one channel for external equipment (optional)
Power Supply 100V: AC 90-132V consumption 200VA
Power Supply 220V: AC 180-250V consumption 200VA
Working Temperature: 0-40� C
Realitive Humidity (No Condensation): 20-95% no condensation
Dimensions: 26.61" x 28.66" x 31.46"
Weight: 94.6lbs.

I&J2504N 4-Axis Robot

Operating Range: X-Axis: 510mm, is: 510mm, is: 150mm, is: �360�
Maximum Load: Worktable: 24.2lbs, Tool: 13.20lbs
Speed PTP: X & Y Axis: 8-800mm/sec, Z-Axis: 3.2-320mm/sec, R-Axis: 8-800�/sec
Speed CP: X, Y, Z Combination: 0.1-800mm/sec
Repeatability:�0.01mm per axis, is: 0.02�
Resolution: X, Y, Z Axis: 0.01mm, is 0.02�
Data Memory Capacity: 255 programs; 30,000 points
Drive System: 5-phase stepping motor
Operation System: Point to Point and Continuous Path
Interpolation: XYZ & R simultaneous (CP) 3D linear interpolation
Teaching Method: Remote & Manual Data Input (MDI) teaching
PLC: 50 programs, 100 steps for each program
I/O Signals: 16 input & 16 output signals
External Interface: RS232C - one channel for PC, one channel for the teach pendant and one channel for external equipment (optional)
Power Supply 100V: AC 90-132V consumption 200VA
Power Supply 220V: AC 180-250V consumption 200VA
Working Temperature: 0-40� C
Realitive Humidity (No Condensation): 20-95% no condensation
Dimensions: 26.61" x 28.66" x 31.46"
Weight: 96.8lbs.

Please contact us for pricing and lead times.


Air-Powered Dispensers * Industrial Dispensing Components * Syringe Barrels * Cartridges * Tips * Nozzles * Robots * Mixers * Hot Melt Dispensers *
Adhesives * Epoxies * Cyanoacrylates * UV Cure * Anaerobics * Epoxies * Silicones * Packaged Components * Techkits * RatioPacks * Hingepacks *



All personal information and payment details is encrypted on SSL secure website pages. Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warranties expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.