Join our mailing list!



You are here: Home > Dispensing Equipment > Dispensing Robots > J2000 Series Benchtop Robots > J2300 Dispensing Robots
We found 0 results matching your criteria.

J2300 Series desktop robot dispensers

Dispensing robots automate most fluid assembly processes providing exact fast and repeatable deposits without mess, waste or errors. For making repeat dots, beads, arcs and circles with any fluid, adhesive or paste. Easy to setup and run and these systems are supplied with syringe dispenser as standard.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

  



Model I&J2300N is a popular dispensing robot in the I&J2000 desktop robot series, with a automatic dispensing area of 11.81 x 12.60 inches (300 x 320mm). The I&J2300N industrial robot is easily programmed using a teach pendant or an optional Windows software. The dispensing robot can accept dispensing valves and syringes with tooling loads of 11Kg and 6Kg. The

J2300 series robots have a maximum base work area of 300mm x 320mm.  In 3 or 4 axis indexing. The 3 axis will allow the head to index vertically to a height of 50mm as it moves X & Y.  And 4 axis for 360 degree head rotation (R) to dispense to the sides of components or around edges.  All robots are supplied with a digital syringe controller, I/O cable, CE compliance start/ stop box, teach pendant, airline hoses, syringe bracket, slide adjustment and detailed instruction manuals.  Ready to use out of the box with comprehensive 1 Year warranty and detailed product/ technical support.

Features:
� Dispense area 11.81" x 12.60"" (300mm x 320mm)
� Repeatability 0.01mm for precise dispensing
� No computer skills required
� 255 programs, 30,000 points of data to internal memory
� Available in two, three and four axis models
� Continous path motion for accurate XYZ dispensing
� Interpolates lines or arcs for three-dimensional dispensing
� Teach Pendant and (optional) PC programming

Accessories:
� J2000N-T - Teach Pendant (Included)
� J2000N-WIN - Windows� Software (Optional)
� 561320-110V - I/O Control Box for up to five dispensers

Models:
� I&J2300N-1: 3-Axis Robot 110V
� I&J2300N-1CE: 3-Axis robot 110V CE
� I&J2304N-1: 4-Axis Robot 110V
� I&J2304N-1CE: 4-Axis Robot 110V CE
� I&J2300N-2: 3-Axis Robot 220V
� I&J2300-2CE: 3-Axis Robot 220V CE
� I&J2304N-2: 4-Axis Robot 220V
� I&J2304N-2CE: 4-Axis Robot 220V CE

I&J2300N 3-Axis Robot

� Operating Range: X-Axis: 300mm, Y-Axis: 320mm, Z-Axis: 100mm
� Maximum Load: Worktable: 24.2lbs, Tool: 13.20lbs
� Speed PTP: X & Y Axis: 8-800mm/sec, Z-Axis: 3.2-320/sec
� Speed CP: X, Y, Z Combination: 0.1-800mm/sec
� Repeatability: �0.007mm per axis
� Resolution: X & Y Axis: 0.0050mm, Z-Axis: 0.0025mm
� Data Memory Capacity: 255 programs; 30,000 points
� Drive System: 5-phase stepping motor
� Operation System: Point to Point and Continuous Path
� Interpolation: XYZ simultaneous (CP) 3D linear interpolation
� Teaching Method: Remote & Manual Data Input (MDI) teaching
� PLC: 50 programs, 100 steps for each program
� I/O Signals: 16 input & 16 output signals
� External Interface: RS232C - one channel for PC, one channel for the teach pendant and one channel for external equipment (optional)
� Power Supply 100V: AC 90-132V consumption 200VA
� Power Supply 220V: AC 180-250V consumption 200VA
� Working Temperature: 0-40� C
� Realitive Humidity (No Condensation): 20-95% no condensation
� Dimensions: 22.05" x 20.83" x 25.55"
� Weight: 77lbs.

I&J2304N 4-Axis Robot

� Operating Range: X-Axis: 300mm, Y-Axis: 320mm, Z-Axis: 100mm, R-Axis: �360�
� Maximum Load: Worktable: 24.2lbs, Tool: 13.20lbs
� Speed PTP: X & Y Axis: 8-800mm/sec, Z-Axis: 3.2-320mm/sec, R-Axis: 8-800�/sec
� Speed CP: X, Y, Z Combination: 0.1-800mm/sec
� Repeatability: X, Y, Z Combination: �0.01mm, R-Axis: 0.004�
� Resolution: X & Y Axis: 0.0050mm, Z-Axis: 0.0025mm, R-Axis: 0.009�
� Data Memory Capacity: 255 programs; 30,000 points
� Drive System: 5-phase stepping motor
� Operation System: Point to Point and Continuous Path
� Interpolation: XYZ & R simultaneous (CP) 3D linear interpolation
� Teaching Method: Remote & Manual Data Input (MDI) teaching
� PLC: 50 programs, 100 steps for each program
� I/O Signals: 16 input & 16 output signals
� External Interface: RS232C - one channel for PC, one channel for the teach pendant and one channel for external equipment (optional)
� Power Supply 100V: AC 90-132V consumption 200VA
� Power Supply 220V: AC 180-250V consumption 200VA
� Working Temperature: 0-40� C
� Realitive Humidity (No Condensation): 20-95% no condensation
� Dimensions: 22.05" x 20.83" x 33.07"
� Weight: 79.2lbs.

Please contact us for pricing and lead times.

Air-Powered Dispensers * Industrial Dispensing Components * Syringe Barrels * Cartridges * Tips * Nozzles * Robots * Mixers * Hot Melt Dispensers *
Adhesives * Epoxies * Cyanoacrylates * UV Cure * Anaerobics * Epoxies * Silicones * Packaged Components * Techkits * RatioPacks * Hingepacks *

All personal information and payment details is encrypted on SSL secure website pages. Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warranties expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.