The model 560548-M loads a barrel directly from a 1/10 gallon (310ml) caulking tube silicone cartridge. This barrel loader is connected to an air regulator and set to a pressure suitable for the material but less than 65psi (4.48 bar). A switch on the side of the stand activates the air flow and is switched off when the material reaches the desired level. This system does not require connection to a dispenser. It will run directly from a compressed air supply and the switch allows the operator to control the on/off.

The barrel attachment assembly is threaded to accept all luer lock barrels. This version of loader has a plastic body retainer and cap.

---

Part ID: 560548-M
Materials: Polyethylene/ Steel/ Nylon
Capacity: 10oz/ 310cc/ 310ml
Weight: 1kg
Max Pressure: 65 PSI (4.48 Bar)
Warranty: 12 Months

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: 560548-M
• Materials: Polyethylene/ Steel/ Nylon
• Capacity: 10oz/ 310cc
• Weight: 1kg
• Max Pressure: 65 PSI (4.48 Bar)
• Warranty: 12 Months

This product will ship by tracked courier.